248. When installing the bearing cap on the device shown in the illustration, which of the precautions listed must be observed

248. When installing the bearing cap on the device shown in the illustration, which of the precautions listed must be observed

Prior to installing the cap, position the thrust shoes in their proper locations.
If the device is covered with abrasive material or contaminates, the unit may be reassembled, provided an abnormal method of reassembly is followed.
Once the bearing cap is properly torqued, measure the end gap dimensions to ascertain even tightening of the cap.
After applying anti-seize to the external threads, torque one side at a time to the appropriate values using a quality torque wrench.

« PreviousSkipNext »

Show clarification Download PDF

Comments (0)

There are no comments at the moment. If you found an error or think question is incorrect, tell everyone about it